Woodturning tools 1
See Rick's special woodturning tools
You don't need lots of woodturning tools - just
the right one
if it has a gold painted
tip it's a Rick Taylor design
PLEASE NOTE FROM THE
START OF 2011 WE ARE ONLY GOLD PANTING
THE INSIDE FINISHING TOOL
TIP
NEW ITEMS/ ON SALE
NOW/ NEW LOOK GOLD PAINTED TIP /
RT NEW WAVE
FINISHING TOOLS
DONT BE FOOLED THERE ARE
TOOLS OUT THERE THAT ARE LOOK A LIKE
SO THE GOLD PAINT ON THE TIP SHOWS THESE ARE
DESIGNED BY RICK TAYLOR
THIS IS THE OUTSIDE FINISHING TOOL ALONG WITH BEING A
DETAILING TOOL FOR BOWL AND SPINNDLE TURNERS
BEFORE AND AFTER PHOTOS BELOW /SHOW THE CLEAN CUT READY
FOR SANDING
PLEASE NOTE THIS TOOL IS NOT GOLD
PAINTED ON THE TIP NOW
FOR THE TIP HAS TO BE
HEATEDTO REPLACE
WHAT A GREAT
FINISHING CUT FROM THESE TOOLS
RT SKEW GOUGE TOOL 2
FOR FINISHING THE OUTSIDE OF ITEMS
AND DETAILING TOOL
YOU WILL SEE HERE THE TIP IS NOT PAINTED GOLD
Tool 1 - RT inside finishing tool.
Fits in to the same handle as the RT skew gouge (tool 2) One handle fits both
tools. Used to reduce end grain fiber pull therefore gives a better finish
before sanding. Easier to get around curves.
CUTS THE INSIDE OF BOXES
ACROSS THE END GRAIN CLEAN 
THE RT INSIDE FINSHING TOOL VERY LITTLE SANDING TO FINISH
PHOTO BLOW
SHOWN ABOVE IN THE PHOTO IS THE INSIDE FINISHING TOOL
CUTTING ACROSS END GRAIN
ALSO THE INSIDE FINISHING TOOL HAS A GOLD PAINTED TIP
THIS SHOWS IT IS A RICK
TAYLOR DESIGN
NOT A LOOK A LIKE OF THE RT INSIDE
FINISHING TOOL
THIS TOOL IS ALSO USED FOR FINISHING
THE INSIDE OF BOWLS
New! RT set of
finishing tools! 2 tools fit the one handle. These tools are shear
cutters for finishing after gouging has been completed. What can they do? Reduce
end grain fibre pull on soft woods, cuts all woods clean ready for sanding
inside and out of turned items. Used for detailing, making beads and
coves, hollowing etc. These tools will just about do anything
a woodturner needs to do. These tools are used by Master
Woodturner - Rick Taylor every day in his
woodturnings. Tools can be purchased as a set or individually
Free mini CD on sharpening and using these
tools when you purchase a set (2 tools and handle)
Soft touch handle
fits all 13mm tool shafts.
The RT
Skew gouge - wow, you will wonder how you did your
woodturning without this little beauty! (replaceable tips also
available for you to sharpen to the same shape as your original skew gouge
purchased from us). This is used as an outside finishing
tool, reduces end grain fiber pull, leaves the surface clean ready for sanding.
Also can be used as a
detailing tool for making beads, coves etc.
Tool 2 - Skew gouge - outside finishing tool/detailer
| Ref Rick Taylor Skew Gouge |
|
Complete tool
with soft touch handle |
|
|
|
replacement
tip |
|
|
|
|
|
email for pricings in your currency. |
|
|
| 
